Porsche 991 981 Center Console Delete

Installation Guide

Product:

Porsche 991 981 Center Console Delete

Tools Needed:

  • 1x - 10mm socket/ratchet

Video Installation Guide:


Step-By-Step Installation Guide:

Approx. assembly and install time: 3 minutes

  1. Line up the rear of the PDK shifter housing with the rear mount.  The easiest way to distinguish between the front and rear mount is to check the width: the rear is skinnier than the front mount.  Then attach the housing to the mount using two of the M6 bolts and a 10mm socket/ratchet.



  2. Repeat the same process for the front mount and attach using two more of the M6 bolts.



  3. Position the shifter in the chassis where you can press in the shifter cable into the shifter receiving end.  Once the the shifter cable presses in you can slide over the white cover.



  4. Line up the four slots with the mounting holes for the original center console.  Tighten them down using the four remaining M6 bolts and a 10mm socket/ratchet.  We recommend torquing them down to 15ft/lbs.