Walbro 255 Fuel Pump Bracket

Installation Guide

Product:

Walbro 255 Fuel Pump Bracket

Tools Needed:

Video Installation Guide:

Step-By-Step Installation Guide:

Approx. assembly time: 2 minutes

1. Insert the fuel pump into the opening of the bracket; the bracket will flex open as you push in the fuel pump.  Remember to take note of the pump flow direction indicated on the fuel pump.
   
   
   
2.  Insert the plastic shim into the gap between the two flanges of the bracket making sure the two holes line up.
   
   
   
3. Insert the two bolts through the holes and tighten down the nuts.  You will need to use two 10mm wrenches or sockets.
   
   
   
4. Mount the bracket to the desired surface using the remaining supply of bolts.